Airbrush Kit, Air Brush Painting Set, Double Action Trigger Airbrush Gun with 0.3Mm/0.5Mm/0.8Mm Needles, 2Cc/5Cc/13Cc Paint Cup, Airbrush Spray Tool Set for Painting Nails Cake Tattoo Makeup
- DOUBLE ACTION AIRBRUSH KIT:The airbrush set comes 3 tip sizes of jet needles and nozzles (0.3mm/0.5mm/0.8mm), 2cc/5cc/13cc paint cup. Equipped with 1/8~1/4 fast joint and 70.87 inches mesh air hose, spraying more convenient. 15-50 psi working pressure. AIR COMPRESSOR IS NOT INCLUDED
- HANDY AND SIMPLE OPERATION: When using the airbrush gun, connecting all parts and fill fluid in the cup, just flipping the trigger to spray the effect you want. Adjusting screw on the tail of the airbrush can change the atomization size and set screw which is in front of the airbrush trigger can adjust the air outlet size
- TROUBLE SHOOTING: If you find the airbrush can’t spray or just flow back, please check the screw of airbrush gun's needle, tightness of the pen pressure cap or the the caliber of nozzle, nozzle cap and needle. Detail instrustion vedios are provided in detail page
- MULTIFUNCTION AIRBRUSH SET: Whether it's a novice or a professional can easily use this airbrush kit. Ideal for painting, nail art, make up, body painting, cover design, cake decorating, tattoo, model coloring, craft hobbies, ect. All the airbrush fittings are storaged in a portable box, meeting your different needs
- WARM TIPS OF AIRBRUSH: Please test the airbrush gun with clean water, make sure the atomization is normal before using with paints. After use, please clean it thoroughly to avoid residual paint blockage the airbrush. If the airbrush cannot spray water or liquid foundation, you can disassemble the tail of the airbrush and tighten the nut on the back
Product Description
Obtain the desired airbrush effect.
How to assemble and test an airbrush properly?
- Take out all the necessary airbrush parts. Install the paint cup. Connected to air compressor.
- Test the airbrush gun with clean water. Take off the cover, pour into the liquid.
- Make sure the atomization is normal before using with paints.
- Use the airbrush’s knob to adjust the air outlet size and water outlet.
Detailed video instruction on the use of airbrush and trouble shooting methods:
-
How to replace parts and install correctly?
Nozzle cap and nozzles should be the same caliber.
The video provides detailed step-by-step instructions for replacing an airbrush accessory, including removing the tailstock, loosening the set screws, removing the old part, and installing the new accessory.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
How to use an airbrush with paint?
- Pour thinned paint into the airbrush paint cup.
- Take out a piece of white paper for spray painting.
- Point the airbrush nozzle at the object you’re painting so it’s about 1–2 inches (2.5–5.1 cm) away
- Perpendicular to the object and pull back the trigger.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
How to clean the airbrush?
When cleaning the airbrush, use pen wash liquid to pour into the paint pot and plug the nozzle, while gently pulling the trigger position appropriately to allow the liquid to flow back inside the airbrush to prevent excess liquid from spilling out. Or you can use the method of loosening the pen pressure cap to let the liquid flow back to achieve the purpose of cleaning!
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
If the airbrush won't spray when you add water?
The first thing to check airbrush gun's needle. If the screws not installed tightly, the pen needle will not retreat.Just tighten this needle and it will be work.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
If the liquid in spray paint cup will only bubble?
Another situation is that the spray will only bubble after receiving water, we need to check the previous section-pen pressure cap. If it is not tight, we need to use this wrench to hold it tight.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
If the airbrush gun still no water coming out?
We need to check the caliber of the components matches. Don't make a mistake with the caliber of nozzle, nozzle cap and needle. It can only be used if it is installed with the same caliber.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Trouble Shooting Methods:
How to use wrench to change tight nozzle?
When you want to change a different caliber nozzle and can't remove the nozzle. Do not press it in front, as squeezing it will cause the nozzzle to deform. Just insert the end of the wrench and gently tap or pry it to loosen the nozzle. Related vedio are uploaded in front page.
If the paint won’t come out of the machine?
Problems may caused by not tightening the nozzle pressure cap, which may prevent spraying or cause backflow, resulting in continuous bubbling of the paint cup. After replacing the accessories, the pressure nozzle cap needs to be tightened a bit.
1. If you find paint won’t come out of the machine sprayer or airbrush not working properly, Why has this happened?
Problems may caused by not tightening the nozzle pressure cap, which may prevent spraying or cause backflow, resulting in continuous bubbling of the paint cup. After replacing the accessories, the pressure nozzle cap needs to be tightened a bit.
2. Spray gun leaks from around the trigger & from behind the paint housing. Why has this happened?
The tail connection of the spray gun is not fully tightened. All accessories must be confirmed to be tightened before use and tested with water first.
3. If you have clogging issue, there is the problem of "no water out of the air", Why has this happened?
The airbrush were used but not cleaned thoroughly, the outlet may be blocked by dried paint. Gently pull out the needle and wipe the needle clean with a paper towel. Put the needle back where you found it and tighten the hat. Try again the effect.
4. What type of paint is the airbrush suitable for?
If the paint is water-based paint, it will be suitable for our airbrush set. The water-based paint is easy to clean-up. The solvent based paint would melt all the plastic parts or swell the handle and other rubber parts.
5. How to use wrench to change tight nozzle when you want to change a different caliber nozzle?
Do not press it in front, as squeezing it will cause the nozzzle to deform. Just insert the end of the wrench and gently tap or pry it to loosen the nozzle. We also uploaded related vedio about how to change the nozzle and needles in detail page.
-
BetyBedy Airbrush Kit Airbrush Gun
All parts of the airbrush gun are marked for you to use better. You can also refer to the manual.
-
Specification:
- Material:Copper
- Working pressure: 15-50 psi
- Caliber: 0.3mm/0.5mm/0.8mm
DOUBLE ACTION AIRBRUSH KIT
The airbrush set comes 3 tip sizes of jet needles and nozzles (0.3mm/0.5mm/0.8mm), 2cc/5cc/13cc paint cup. Equipped with 1/8~1/4 fast joint and 70.87 inches mesh air hose, spraying more convenient. 15-50 psi working pressure. AIR COMPRESSOR IS NOT INCLUDED.
Precise Nozzle
The airbrush set comes 3 tip sizes of jet needles and nozzles (0.3mm/0.5mm/0.8mm).
Adjustable Air Outlet Size
Set screw which is in front of the airbrush trigger can adjust the air outlet size.
Atomization Size Control Knob
Adjusting screw on the tail of the airbrush can change the atomization size.
Stainless Steel Needles
The airbrush set comes 3 tip sizes of jet needles and nozzles (0.3mm/0.5mm/0.8mm).
FAQS
We accept payments from major credit card companies like Visa, Mastercard, and American Express.
Shipping can take up to 12 business days.
Due to global supply chain challenges, shipping times could be longer than usual.
Certainly! We will send you an email with your tracking link within 2 business days after placing your order.
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.